特賣專場匯：霍尼韋爾XL50A-UMMI-PC現場DDC控制器

霍尼韋爾XL50系列DDC控制器包括一些常用型號XL50A-MMI-EP、XL50A-UPC、XL50A-UMMI-PC、XL50A-UPCCBLON、XL50A-UMMIPCCBLON，這5款XL50現場DDC控制器的原產地是德國，產品功能強大（提供8UI通用輸入、4DI數字輸入、4AO模擬輸出、6DO數字輸出）、性能穩定（長時間工作不宕機）、使用壽命長（正常設計壽命可以用10年以上），現霍尼韋爾樓宇自控產品中國總代理——深圳市松賢機電設備有限公司為致敬經典，特推出特賣專場匯，XL50A-UMMI-PC現場DDC控制器限時特價秒。

GENERAL
The Excel 50 controller has built-in communication capability, allowing it to be integrated into a Honeywell EXCEL 5000?. System or into an open LONWORKS? network communicating with Excel 10 controllers as room/zone controllers or with 3rdparty products. It can also serve as a stand-alone controller.  Typical areas of application include heating systems, district heating systems, and air conditioning plants for restaurants, shops, offices, and small branch government buildings.

The Excel 50 supports standard LonMark? Network Variables according to the LonMark? Interoperability Guidelines V.3.0. It can serve 22 integrated I/Os and supports peer-topeer communication; thus, in the case of larger-scale applications, several different controllers can be linked and accessed. The system firmware is stored in Flash EPROM located in the application module (a separate module plugged into the controller housing.) Flash EPROM allows easy upgrading of the operating system via download.

The Excel 50 is a freely programmable controller engineered using Honeywell’s CARE programming tool. For LONWORKS? interoperability, a maximum of 46 LonMark? NVs are available.

FEATURES
? Various state-of-the-art communication options: Open LONWORKS? bus or C-bus communication
   Unique features in open LONWORKS? networks: NVBooster ? reduces the number of required NVs and thus also the number of required controllers; NV bindings can be restored after controller reset (and thus need not be redone after exchanging controllers); 46 NVs supported for LONWORKS? integration
? Reduced engineering and start-up costs: Huge variety of pre-tested and fully documented applications
? Easy and flexible installation: Screw terminals; mounting inside cabinet (DIN rail) or in cabinet front door
? Operating options: Integrated operator interface, XI582 Remote Interface, XI882 Remote Touch-Panel Interface, and XL-Online PC-based interface

DESCRIPTION
The Excel 50 controller is available in two housing versions, one with and one without a Man-Machine-Interface (MMI.) The MMI version allows buswide access to other controllers. The XI582 operator interface or the PC-based XL-Online operator and service software can be used in conjunction with either version. The housing can be mounted inside a cabinet on a DIN-rail or in a cabinet front door.

The Excel 50 has eight analog inputs, four analog outputs, four digital inputs (three of which can be used as totalizers,) and six digital outputs. The digital outputs allow the direct drive of 3-position actuators (up to the max. load.) The controller can be wired either with screw terminal blocks directly at the housing.) Pre-wiring is possible in both cases, and a controller can be replaced without rewiring.

The application modules – all with Flash EPROM – are available in three bus-wide access versions and one standalone version. They feature a variety of bus interfaces (see Table 1.) Large RAMs provide for increased trending capability.

All changeable parts or switches are accessible without opening the housing. Communication capabilities and memory are easily upgraded by replacing application modules.